Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Legionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without GuessingHow to know your thermometer reads correctly before a faulty reading costs you an entire batchVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Legionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without GuessingHow to know your thermometer reads correctly before a faulty reading costs you an entire batch
Item number 28-300

Digital pocket thermometer, -40 to 150C.

184 SEK

In stock

The 300 Digital Temperature Probe features a 1.5 mm thin tip for fast response. With its large digits, it is an easy-to-read and user-friendly thermometer for quick checks when cooking a variety of foods.

Request a quote 28-300

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Free shipping on orders over 3000 SEK excl. VAT
  • Measuring instruments and hygiene tests for self-monitoring since 2003
  • Call us +46 8 753 00 04

Category:

Other models in the series 16

Description

The 300 Digital Temperature Probe features a 1.5 mm thin tip for fast response. With large digits, the 300 is an easy-to-read and easy-to-use thermometer for quick checks when preparing a variety of foods.

The 300 has a hold button that allows you to keep the digital reading on the screen while you note a measurement.

The 300 Digital Temperature Probe is also waterproof.

The 300 Digital Temperature Probe is a basic reduced (thin) tip thermometer with BioCote Antimicrobial Protection. The 300 is slim and light, making it perfect for slipping into shirt, trouser, or apron pockets between uses. It has a 127mm / 5″ long stem and a 1.5 mm / 0.6″ diameter from the tip, making it suitable for probing thinner foods. The 300 Digital Temperature Probe is field calibratable and has switchable °F/°C temperature scales/ranges, a data hold function, and a low battery indicator. You can either use ON/OFF to save battery life or let the unit switch off automatically after a short period. This digital pocket thermometer includes a protective pouch with a pocket clip and a battery.

The 300 is also available with a rubber boot, click here.


Field Calibration Procedures

The 300 is only calibratable in an ice slurry (60 percent crushed ice to 40 percent tap water) or a water bath. Do not attempt to calibrate in any other way.

Immerse the thermometer stem to at least half of its length in the ice slurry.

Wait until the reading stabilizes (typically within ±2° of 32 °F or ±1° of 0 °C).

Press and hold the CAL button for 8 seconds to start calibration.

CAL is displayed for two seconds, and calibration at 0 °C / 32 °F is complete.

Remove the thermometer from the ice water and continue measuring.

Note: CAL is displayed whenever D-H is pressed for 8 seconds, but the thermometer will not calibrate unless the tip is inserted into ice water.


°F/°C Switchable

The 300 Digital Temperature Probe has temperature scales/ranges that can be switched to °F/°C. With the thermometer turned OFF, press and hold ON/OFF. Release when the desired scale is displayed.

Note:This is the procedure for all digital pocket thermometers that do not have a °F/°C scale button.


Additional information
Product Type

Type

PDF (4)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *