Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The fridge failed on Friday evening and no one noticed until Monday morningLegionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without GuessingVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The fridge failed on Friday evening and no one noticed until Monday morningLegionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without Guessing

How to know your thermometer reads correctly before a faulty reading costs you an entire batch

Published 13 October 2026 at 11:57

The thermometer in the control room reads 74 °C, but is it really 74 °C? In many workplaces, instruments go months or even years between checks, simply because checking them is a hassle. You have to find an ice bath, a reference probe and a quiet moment. So the check gets postponed, and only when something deviates do you start to suspect the measurement.

ETI MicroCal® 2 calibrated temperature simulator, simulates type K temperature sensors at 12 different temperatures. With calibration certificate

What the MicroCal 2 is

The MicroCal 2 is a handheld temperature simulator for thermocouple thermometers. It outputs an electrical signal corresponding to an exact temperature for a type K thermocouple. You connect it to the thermometer’s input using the included one-metre cable and read what the instrument displays. The difference from the set temperature is the thermometer’s deviation. No conversion tables are needed.

The simulator has twelve preset points: -20, -10, 0, 10, 30, 50, 100, 195, 250, 500, 800 and 1000 °C. You can change and save any point, for example the temperature that is critical in your particular process, and the factory-set values can always be restored. The accuracy is ±0.3 °C, and every unit is delivered with a five-point UKAS calibration certificate. It is powered by two AAA batteries and weighs 175 grams.

The problem it solves

Checking the thermometer’s electronics becomes a routine task that takes a few minutes at the workbench. It can be done often, and it is the frequency that provides peace of mind. Note that the simulator checks the instrument and not the probe. A worn or damaged thermocouple is still best caught by comparison against a reference thermometer or an ice bath. The two checks complement each other.

Three situations where it is used

Food production. In the self-monitoring programme, thermometers for chilling, cooking and hot holding must be verified at regular intervals. With the simulator, you check 0, 10 and 100 °C in one go and document the deviation for each instrument.

Workshops and heat treatment. Furnaces and hardening processes often run at 250 to 1000 °C. There, it is neither practical nor safe to check the thermometer against a physical bath. The 500, 800 and 1000 °C points let you test the instrument across its working range without heating anything.

Maintenance and HVAC. The service technician who needs to trust their handheld instrument before an adjustment can check it in the car or on site. This is considerably cheaper than discovering afterwards that an entire installation has been balanced with a thermometer that had drifted.

Why it pays off

The cost of a thermometer that reads incorrectly rarely shows up as a line item on the invoice. It shows up as scrapped production, rework, a remark during an audit or a recall. Sending instruments to an external lab also means downtime and shipping per instrument. With your own simulator, you check the entire instrument fleet in-house, as often as you like, and only send the simulator itself for recalibration. With more than a few thermometers, the calculation adds up quickly.

Please note that the unit is calibrated when ordered and therefore has a delivery time of 10 to 14 days.

Read more

More news

All news