Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Legionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without GuessingHow to know your thermometer reads correctly before a faulty reading costs you an entire batchVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Legionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without GuessingHow to know your thermometer reads correctly before a faulty reading costs you an entire batch

A spot check doesn’t tell you what happened in the cold room overnight between two inspections

Published 14 October 2026 at 13:22

The cold room showed 4 °C when you went home and 4 °C when you came back in the morning. Yet the products at the back of the shelf are tough in texture, and the quality manager asks whether the temperature held all night. With a handheld thermometer and a line in a binder, there is no way to answer. That is the gap where a logger proves its worth.

ETI ThermaData TD2F temperature logger

What is the ThermaData TD2F?

The TD2F is a temperature logger with an LCD display and two external, fixed NTC probes on one metre of cable. The probes are needles measuring Ø3.3 x 100 mm. The logger measures from -40 to 125 °C and stores up to 2 x 2000 readings, that is, 2000 per channel. The housing is sealed to IP66/67. It complies with EN 12830, which is relevant for the transport and storage of food, and a five-point UKAS certificate is available as an option.

What problems does it solve?

The logger replaces memory and guesswork with a curve. You see how the temperature has moved over time, not just what it was when someone happened to look. A green LED flashes when the logger is active and a red one when your preset alarm limits have been exceeded. This means you can tell from the display or the light whether something has happened, even without opening your computer. Readout is done via USB with free software that generates a report. Please note that at least one logger holder must be ordered together with the logger.

Three situations where it is used

In food production, one probe is placed in the air and the other in a product in the same cold room. The difference between the channels shows how quickly the product follows the air temperature after a defrost or a longer door opening.

In commercial kitchens and industrial manufacturing, the cooling of hot batches is measured. With one probe in the middle of the batch and one near the surface, you document that the core temperature drops within the permitted time, which is a recurring point in self-inspection programmes.

In laboratories and warehouses, refrigerators, freezers and sample rooms are monitored. With an interval of five minutes, the memory lasts for roughly seven days per channel, so a week between readouts works without any problems.

Why it pays off

The cost of a deviation that cannot be documented is often an entire pallet space of discarded goods, or a delivery that the customer rejects. A logger lets you show that the temperature was maintained, or pinpoint exactly when it was not and thereby which batches are affected. You also save time: the report is generated directly from the software instead of being compiled by hand. Two probes in the same instrument also give you two measuring points without having to buy two loggers.

If you need to document temperature over time, and not just at a single moment, the TD2F is a robust choice with a clear on-site readout.

Read more

More news

All news