Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Legionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without GuessingHow to know your thermometer reads correctly before a faulty reading costs you an entire batchVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Legionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without GuessingHow to know your thermometer reads correctly before a faulty reading costs you an entire batch

Three known temperature points are enough to tell whether your thermometer still reads correctly

Published 11 November 2026 at 23:45

The thermometer sits in the toolbox or hangs by the production line, the display shows a stable value and nobody questions it. Then the instrument is dropped on the floor, or it has simply been two years since the last check, and suddenly nobody knows whether 72.0 °C was really 72.0 °C. Many have been there: the instrument seems to work, but there is no way to prove it.

ETI MicroCheck® calibrated temperature simulator, simulates type K temperature probe for 3 temperature points: -20°C, +20°C & +200°C. With calibration certificate and protective case

What MicroCheck is

The ETI MicroCheck is a small handheld temperature simulator. It produces an electrical signal corresponding to a type K thermocouple probe at three fixed temperatures. In this model the points are -20 °C, +20 °C and +200 °C. You connect it using the supplied one-metre type K lead, read your thermometer and compare it with the value the simulator is supposed to give. The accuracy is ±0.5 °C, and every unit is delivered with a UKAS calibration certificate for the three points, so the deviations are documented.

The problem it solves

An ice bath or a dry-block calibrator requires time, equipment and someone who knows how to use it. MicroCheck moves the check to the place where the thermometer is used. It checks the instrument’s electronics and readout, in other words the part that determines whether the display can be trusted. Note that it does not test the probe itself. A damaged probe tip will therefore not be detected, but that is a separate and simple visual check.

When and why it is used

The check is carried out at fixed intervals, after an instrument has been dropped, when a misreading is suspected and before an audit. If the routine is simple, it gets done. If it is cumbersome, it gets postponed, and then there is no documentation the day someone asks for it.

Three areas of use

Food production. In HACCP routines the thermometer is a measuring instrument that must be able to show it has been checked. The -20 °C and +20 °C points cover freezer and room temperature, while +200 °C covers frying and deep-frying. The quality manager can do the check in a few minutes instead of sending in all the thermometers at once.

Workshop and heat treatment. With furnaces, hardening and moulding tools, temperature determines the result. A thermometer that has drifted a few degrees can produce an entire batch with the wrong properties. With a regular check you see the drift before it costs you material. For higher temperatures there is the MicroCheck 1 with points at 0, 100 and 500 °C.

Maintenance and HVAC. Service technicians who measure flow and return temperatures on heating systems need to be able to rely on the differential. The check can be done in the service van before the job. There are four models in total with different temperature points, so you choose the one closest to your working range.

Why it pays off

The cost of a misreading thermometer is rarely visible until it is large: scrapped production, a deviation at an audit or a remake. MicroCheck lets you check many instruments often, and send in only those that actually deviate. It is powered by two AAA batteries with about 300 hours of operating time, weighs 175 grams and has a two-year warranty. Allow 10 to 14 days for delivery, as the unit is calibrated when you place the order.

If you work with type K thermometers and need to be able to show that they have been checked, this is a practical way to do it on an ongoing basis. Read more about the models and choose temperature points that suit your process.

Read more

More news

All news