Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Legionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without GuessingHow to know your thermometer reads correctly before a faulty reading costs you an entire batchVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Legionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without GuessingHow to know your thermometer reads correctly before a faulty reading costs you an entire batch

How to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known Points

Published 17 October 2026 at 04:23

The display shows 72.4 °C, the number holds steady and nobody has any reason to question it. Yet the thermometer has been sitting in a toolbox for two years, has been dropped at least once and has never been checked. This is a common situation in both production and maintenance: you rely on a reading that no one knows to be correct.

ETI MicroCheck® calibrated temperature simulator, simulates type K temperature probes for 3 temperature points: 0°C, +100°C & +400°C. With calibration certificate and protective cover

What MicroCheck Is

The ETI MicroCheck is a handheld, calibrated temperature simulator for thermometers with type K thermocouples. It works like a probe that always gives exactly the same known signal. You connect it to the thermometer with the included one-metre cable and read whether the instrument displays the correct value at three fixed points. No ice bath, oil bath or dry-block calibrator is needed.

There are four models with different temperature points. MicroCheck 1 simulates 0, 100 and 500 °C, while model 4 covers -20, 0 and 100 °C for refrigeration and freezer applications. Each unit is supplied with a UKAS calibration certificate for the three points, so the deviations are documented.

The Problem It Solves

Thermometers drift slowly, and the electronics can be affected by shocks, heat and moisture. Sending all instruments for external calibration is expensive and means they are unavailable for several days. MicroCheck makes it possible to carry out a quick check between formal calibrations, for example every week or before a critical work shift. Keep in mind that the simulator checks the instrument’s electronics, not the probe itself. The probe should be checked separately, for example in an ice bath.

Three Areas of Use

Food production. Self-inspection programmes require temperature measurement to be reliable. A documented weekly check of handheld thermometers shows that the cold chain and core temperatures have actually been measured correctly.

Workshops and heat treatment. Where a furnace or a hardening step is controlled by a measurement, a deviation of a few degrees can affect the material. The check takes a few minutes at the machine.

Maintenance and HVAC. Service technicians who adjust systems based on temperature differences want to know that the instrument is not biased in either direction, especially when several instruments are compared against each other.

Why It Pays Off

The cost of a faulty thermometer is seldom visible right away. It shows up as a scrapped production batch, a nonconformity at an audit or a process that has run with the wrong parameters for weeks. With your own check unit you detect the deviation when it occurs and avoid both unnecessary external calibrations and the uncertainty between them. The unit is powered by two AAA batteries, has about 300 hours of battery life and comes with a two-year warranty. It is calibrated to order, so allow 10 to 14 days for delivery.

If you have more than a couple of thermometers in your operation, a check routine with MicroCheck is a simple way to keep your measurements dependable.

Read more

More news

All news