Digital pocket thermometer with rubber protection, -40 to 150C.
195 SEK
The 300B Digital Temperature Probe features a 1.5 mm thin tip for fast response and comes with a protective rubber boot for extra protection.
Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%
- Free shipping on orders over 3000 SEK excl. VAT
- Measuring instruments and hygiene tests for self-monitoring since 2003
- Call us +46 8 753 00 04
Category: Digital pocket thermometers
Other models in the series 16
Description
The 300B Digital Temperature Probe features a 1.5 mm thin tip for rapid response and comes with a protective rubber boot for extra protection. With large digits, it is an easy-to-read and easy-to-use thermometer for quick checks when preparing a variety of foods.
The temperature probe has a hold button that allows the user to freeze the digital reading on the screen while noting a measurement.
The 300B digital temperature probe is also waterproof.
- Field calibratable
- Data hold function
- BioCote antimicrobial protection
- NSF certified
- Accuracy ±1 °C / ± 2°F
- 1.5 mm thin tip probe
- Waterproof
The 300B digital temperature probe with boot is a basic reduced (thin) tip thermometer with Biocote Antimicrobial protection. The 300B is slim and lightweight, making it perfect for slipping into shirt, trouser, or apron pockets between uses. It has a 127mm / 5″ long stem and a 1.5 mm / 0.6″ diameter from the tip, making it suitable for probing thinner foods. The 300B digital temperature probe is field calibratable and has switchable °F/°C temperature scales/ranges, a data hold function, and a low battery indicator. You can either use ON/OFF to save battery life or let the unit switch off automatically after a short period. This digital pocket thermometer includes a protective pouch with a pocket clip and a battery.
The 300B is also available without the rubber boot, click here.
Field Calibration Procedures
1. The 300B is only calibratable in an ice slurry – 60 percent crushed ice to 40 percent tap water – or a water bath. Do not attempt to calibrate in any other way
2. Immerse the thermometer shaft to at least half its length in the ice slurry
3. Wait until the reading stabilizes (typically within ±2° of 32 °F or ±1° of 0 °C)
4. Press and hold the CAL button for 8 seconds to initiate calibration
5. Calibration is displayed for two seconds, and calibration at 0 °C / 32 °F is complete
6. Remove the thermometer from the ice water and continue measuring
Note: CAL is displayed whenever D-H is pressed for 8 seconds, but the thermometer will not calibrate unless the tip is inserted into ice water
°F/°C Switchable
The 300B digital temperature probe has temperature scales/ranges that can be switched to °F/°C. With the thermometer turned OFF, press and hold ON/OFF. Release when the desired scale is displayed.
Note: This is the procedure for all digital pocket thermometers that do not have a °F/°C scale button.
Additional information
| Product Type | |
|---|---|
| Type |
PDF (6)
Reviews (0)
Be the first to review Cancel reply
Related products
-
-
-
28-KM400APAllergen-safe digital pocket thermometer, measuring range -50°C to +200°C
366 SEKIn stock -














There are no reviews yet.