Hoppa till innehåll
Free shipping over 5.569 SEK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The fridge failed on Friday evening and no one noticed until Monday morningLegionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without GuessingVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The fridge failed on Friday evening and no one noticed until Monday morningLegionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without Guessing
Item number 28-DT400FR

Digital Pocket Thermometer (Fr) with Built-in Stainless Steel Probe, °C or °F Readings, Max/Min Function and Protective Boot, -20°C to +200°C. Waterproof and Commercial Dishwasher Safe. BioCote® Antimicrobial Protection.

309 SEK

In stock
Request a quote 28-DT400FR

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Free shipping on orders over 3000 SEK excl. VAT
  • Measuring instruments and hygiene tests for self-monitoring since 2003
  • Call us +46 8 753 00 04

Category:

Other models in the series 9

Description

The DT400 pocket thermometer with a thin probe features a large digital display visible from the top of the instrument.

  • Temperature range: -20°C to +200°C / -4°F to +400°F
  • Thin probe: 1.5 mm
  • Accuracy: ±0.5 °C / ±1 °F
  • For use in commercial dishwashers only
  • Warranty: 1-year limited


Pocket thermometer with thin probe

The DT400 pocket thermometer with a thin probe features a large digital display visible from the top of the instrument. By using the maximum hold button, you can switch between the maximum reading and the current temperature reading.

The DT400 pocket thermometer can be used for checking food temperatures, and the thin probe provides a response within 6 seconds.

It is a waterproof thermometer and durable enough to be used for checking the final rinse cycle temperature of commercial dishwashers.


User manual

Press the on/off button to start or stop the operation of the DT400. The unit automatically turns off after 35 minutes to save battery life. Press the ”°F/°C” button to select the Fahrenheit or Celsius scale.

MAX temperature: Press the ”MAX” button to display the maximum temperature recorded. To clear the MAX reading from memory, press the MAX button and the ”on/off” button simultaneously for 2 seconds to reset the unit to the current temperature display.

Data Hold: To hold a displayed reading, press the ”D-H” button. ”D-H” is displayed in the upper right corner of the screen while data hold is active. Press the button again to return to normal operation.

Battery removal: Use a flathead screwdriver or a coin to turn the battery cover counterclockwise for removal. Reinsert the battery and turn the cover clockwise until it is secure.


Field calibration procedures

1. The DT400 can only be calibrated in a slush ice solution (60% crushed ice and 40% tap water) or a water bath. Do not attempt to calibrate in any other manner.

2. Immerse the thermometer shaft to at least half its length in the slush ice solution.

3. Wait until the reading stabilizes (typically within ±2° of +32° F or ±1° of 0 ° C).

4. Press and hold the ”D-H” button for 8 seconds to initiate calibration.

5. ”CAL” is displayed in seconds, and calibration at 0 °C / +32 °F is complete.

6. Remove the thermometer from the ice water and continue taking measurements.

NOTE: ”CAL” will be displayed whenever the ”D-H” button is pressed for 7 seconds, but the thermometer will not recalibrate unless the probe tip is inserted into the ice.


Technical specifications

Name Value
Temperature measurement range -20°C to +200°C / -4°F to +400°F
Accuracy ±0.5 °C / 1 °F
Sampling time 1.5 seconds
Response Less than 6 seconds
Probe tip diameter 1.5 mm
Waterproof Yes
Scales °C/°F
Battery type (up to mid-2014) 3V CR2032H Coin cell
Battery type (from mid-2014) 1.5 V button cell battery (LR44)
Compliance with EU Regulation 1935/2004 (Framework Regulation on all materials intended to come into contact with food) Yes
Shaft (axle) material SUS304 Stainless steel
Warranty 1 year limited
Additional information
Product Type

Type

Waterproof

PDF (2)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *