Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Legionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without GuessingHow to know your thermometer reads correctly before a faulty reading costs you an entire batchVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Legionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without GuessingHow to know your thermometer reads correctly before a faulty reading costs you an entire batch

A Bunch Has an Inner Life the Surface Never Shows

Published 27 August 2026 at 17:02

The surface temperature of a compost heap, a grain bin or a large tank tells you almost nothing about its contents. The surface is in equilibrium with the air around it — it mostly reflects the weather. Whatever is actually happening is happening inside.

And something is often happening there. A compost heap is heated by its own biological activity. Grain stored at too high a moisture content respires and gives off heat. Freshly laid asphalt cools from the outside in. A large container stratifies. In every case, the interesting temperature is at a depth you can’t reach with your hand.

ETI laang temperaturgivare 1400 mm med T-format handtag

What it is

A long penetration probe in reinforced stainless steel, type K.

  • Dimensions Ø9.5 x 1400 mm — also available in 1000 and 2000 mm
  • Reduced tip for faster response
  • Response time under 20 seconds
  • Measuring range -75 to +250 °C, accuracy according to BS EN 60584-1
  • T-shaped handle in polypropylene, 1 metre cable

The T-handle is engineering, not convenience

Pushing a metre and a half of steel into packed material takes force. With a straight handle there is nothing to brace against, and whatever force you do manage to apply easily ends up sideways — bending the probe instead of driving it in.

A T-shape gives both hands a grip and lets the force be applied along the probe’s axis, where a narrow tube is at its strongest. It’s the same reasoning behind the corkscrew probe’s T-grip for frozen foods: when the material resists, the handle becomes part of the measuring tool.

The reduced tip resolves a contradiction

The shaft needs to be thick, the tip should be thin. Nine and a half millimetres is needed for the tube to withstand being driven down without bending — but a tip that thick would have significant thermal mass, and would therefore take a long time to reach the temperature of its surroundings.

The solution is to taper just the very tip. The mass stays where strength is needed, and is removed where response time is decided. That a probe of this length can respond in under twenty seconds inside a packed mass is a direct result of exactly that.

A reading is a sample, not an average

The probe shows the temperature at the tip. That sounds obvious, but it’s the most important limitation to understand: a mass doesn’t have one temperature, it has a distribution. A compost heap has a warm core and cooler edges. A grain bin may have a hot pocket in one spot and be normal everywhere else — and that pocket is exactly what you’re looking for.

That’s why a single insertion is only a sample. An assessment requires several: at different depths and in different spots, ideally always the same spots, so readings can be compared from one time to the next. It’s the pattern over time that tells you something — a single reading only tells you it wasn’t bad right there, right then.

Three typical use cases

  • Compost and biofuel: monitoring process temperature and checking against the risk of self-ignition.
  • Grain and feed: checking stored goods, where localised heating is an early warning.
  • Large containers and asphalt: measuring at depths that can’t be reached any other way.

Why it pays off

What these applications have in common is that the process starts slowly and ends quickly. A pile heating up a few degrees per day looks unchanged on the surface — until it no longer is, and by then the response is no longer a matter of turning it over but of an intervention.

A measurement that takes a minute and can be made in several spots means the process is caught while it’s still a curve and not yet an event. And in this context, the cost of the instrument is negligible compared to the batch you’d otherwise lose.

Read more about the long 1400 mm probe →

More news

All news