Hoppa till innehåll
Free shipping over 5.552 SEK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Legionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without GuessingHow to know your thermometer reads correctly before a faulty reading costs you an entire batchVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Legionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without GuessingHow to know your thermometer reads correctly before a faulty reading costs you an entire batch

A Slow Sensor Isn’t an Inferior Sensor — It’s the One That Answers the Right Question

Published August 24, 2026 at 09:44

The refrigerator door stands open for three minutes while goods are loaded in. The air temperature inside the cabinet rises quickly, the alarm goes off, and a deviation is logged. The only question is: did anything actually happen to the food?

Almost certainly not. A package of ground beef or a crate of milk has completely different thermal inertia than the air around it, and barely has time to notice three minutes. But self-inspection measures the air, and it’s the air’s story that ends up in the log — and sometimes in the trash bin.

ETI livsmedelssimulerande temperaturgivare typ K med stor maetkropp foer kyl och frys

What it is

A food-simulating probe — a type K thermocouple probe whose sensing body is deliberately made large.

  • Sensing body 9 x 100 x 100 mm, 3 metre cable
  • Measuring range -20 to 100 °C
  • Accuracy type K ±0.5 °C (0 to 100 °C)
  • Slow response time, on purpose — designed to follow the food’s temperature rather than the air’s
  • Intended for refrigerated and frozen storage

The problem it solves

Almost all probe development is about getting faster. Here it’s the opposite, and it’s not a compromise. Regulations and common sense ask the same question: what temperature did the food hold? A small, fast probe answers a different question — what temperature did the air hold — and the two answers differ most precisely in the situations you actually care about.

Two kinds of error disappear at the same time. The first is the false alarm: every door opening, every loading, and every defrost cycle produces an air spike that corresponds to nothing in the product. The second, and more serious, is false confidence: when a refrigeration unit starts to fail, the air temperature still swings up and down with the compressor, while the product rises slowly and steadily. The air curve can then look almost normal while the food is actually getting warmer.

The size of the sensing body is the entire mechanism. A body measuring 9 x 100 x 100 mm has enough mass to take its time changing temperature, much like a food package does. The probe doesn’t mimic the food’s temperature by calculation — it physically behaves like food. That means the reading can be interpreted directly, without corrections and without judgment calls.

And what shows up in the bottom line: less waste. Once an alarm is triggered, it’s hard to argue against it — if you don’t know what temperature the food actually held, discarding it is the safe path. With a probe that measures the product instead of the air, deviations become fewer and the ones that do occur are real, meaning you throw food away when you should and keep it when it’s unharmed.

Three typical use cases

  • Cold rooms and freezer rooms in commercial kitchens: where the door is opened many times a day and air alarms would otherwise become routine.
  • Retail and refrigerated display cases: open cases with constant air exchange, where air temperature is nearly meaningless as a measure of the product.
  • Warehousing and distribution: documentation that the cold chain was maintained, with readings that describe the goods rather than the space.

Why it pays off

Self-inspection costs nothing when it shows the right thing. It costs money when it shows the wrong thing — in time spent investigating deviations that were never really deviations, and in goods discarded because no one can prove otherwise. Both costs grow with the number of alarms, not with the number of real problems.

A probe that behaves like the food makes the log both more credible and more useful: fewer entries to explain, and the ones that remain actually mean something. For the price of a single discarded crate, it’s a change that pays for itself immediately.

Read more about the food-simulating probe →

More news

All news