Published 2 July 2026 at 17:45
Some temperature tasks are simply beyond what a standard IR thermometer can handle. Metal melts in foundries run between 700 and 1,400 °C. Hardening furnaces operate between 800 and 1,100 °C. Glass melting plants run well above 1,000 °C. For these tasks, the thermometer needs to cover the 500–1,400 °C range without requiring any extra calibration. And for cases where IR measurement isn’t feasible — blackened surfaces, hidden heat sources, or the internal temperature of a pipe or vessel — you need the option of connecting a thermocouple probe directly to the same instrument. The RayTemp 28 answers both needs in one unit.
What ”-50 to 1370 °C” Actually Makes Possible
ETI RayTemp 28 is a high-temperature IR thermometer with a range of -50 to +1350 °C via the IR sensor, plus -50 to +1370 °C via the built-in Type K thermocouple socket. Note the span: from arctic cold to glowing metal, all within the same instrument. This is exceptional for a handheld instrument; most competitors cover one end or the other, but not both.
What a 30:1 Optical Ratio Means in Practice
The optical ratio — also known as the ”distance-to-spot ratio” — describes how far away you can stand from the target while still measuring a sufficiently small area. A 30:1 ratio means that at a distance of 3 meters, you are measuring an area 10 cm in diameter. At 30 cm, you are measuring 1 cm.
This is critical in high-temperature work: standing close to a 1,200 °C melt is rarely a good idea. The RayTemp 28’s 30:1 optics let you stand at a safe distance — 1.5 to 3 meters — while still targeting a specific point of interest. Ordinary IR thermometers with 8:1 or 12:1 optics have to be held close, often too close, in high-temperature environments.
Dual Laser Beams for Reliable Aiming
At a distance, it is hard to know exactly where the IR beam is hitting. The RayTemp 28 uses dual laser beams that mark the outer edges of the measurement spot — just as the CIR series has proven to do. At a distance of 3 meters, the beams converge on a spot that shows exactly the 10 cm circle from which the instrument measures the average value. It is the only visualization you need to know where the measurement is actually taking place.
The Thermocouple Input — When IR Isn’t the Answer
IR measurement works by detecting thermal radiation from the surface of an object. There are situations where IR measurement gives the wrong answer:
Reflective metals: Clean, polished aluminum or steel reflects ambient heat and gives unreliable IR readings, even after emissivity adjustment. A thermocouple in direct contact gives the correct value.
Liquid temperature: Measuring the temperature of a liquid at a depth of 3 cm is impossible with IR (which only measures the surface). A thermocouple probe immersed in the liquid is the only practical way.
Internal temperature in materials: The internal temperature of a pipe, the center of a vessel, the inside of an insulated component. All of these require contact measurement.
Core temperature in food: HACCP requirements for the core temperature of cooked food call for an insertion probe, not an IR surface temperature.
The RayTemp 28 solves this by offering both measurement principles in one instrument. The thermocouple socket accepts any Type K probe — a short probe with a tip, a penetration probe, a surface contact probe, an air probe — depending on the application. The probe is not included in the basic delivery, giving the user the freedom to choose the right one for the job.
Where the Combination Instrument Makes a Real Difference
Foundries and smelters: IR measurement of the melt surface from a safe distance; thermocouple measurement of mold temperature; checking of permanent mold temperatures before filling.
Hardening and heat treatment industry: Furnace surface temperature (IR from the outside), workpiece temperature (IR or thermocouple depending on accessibility), conveyor belt temperature, the quenching bath.
Metalworking: Welding preparation (confirming preheating of thick components), post-weld heating for stress relief, batches of hardware during heat treatment.
Glass industry: Furnace temperatures, glass temperature at various stages of the manufacturing process, the temperature curve of the cooling process.
Power plant and utility servicing: Hot gas lines, steam lines (insulated exteriors via IR, actual fluid temperature via thermocouple through measurement ports).
Commercial kitchens and catering: Oven temperature (IR), core temperature of cooked food (thermocouple penetration probe), surface of grills and griddles.
HVAC and installation inspection: Duct temperatures (thermocouple air probe), heat exchanger surfaces (IR), pipe insulation checks (IR on the insulation surface).
Additional Features Worth Mentioning
Adjustable emissivity: Different surface materials differ in their ability to emit thermal radiation. The instrument can be adjusted to compensate — critical for accurate IR measurements on shiny metal vs. oxidized metal vs. plastic vs. damp stone.
Max/Min/Diff/Avg modes: When measuring variable temperatures (e.g., a rotating roller or an unevenly heated workpiece), the instrument can display the highest, lowest, difference or average value over the measurement period.
Configurable alarms: High and low threshold values can be programmed. Values that exceed the thresholds trigger an audible alarm — practical for continuous monitoring during machining processes.
IP54 protection: Splash-proof for use in harsh industrial environments, with an ABS carrying case for transport.
What You Get for Your Money
-50 to +1370 °C measuring range (IR + thermocouple), 30:1 optical ratio, dual laser beams for reliable aiming, Type K thermocouple input, adjustable emissivity, Max/Min/Diff/Avg, configurable alarms, IP54 protection, backlit LCD, automatic shut-off to save battery, ABS carrying case.
SEK 2,250 is a modest price for an instrument that covers the temperature span from -50 to 1370 °C — it often replaces both a standard IR thermometer and a separate thermocouple thermometer. For workshops engaged in heat treatment, foundry work, hardening or metalworking, it is often the only instrument needed for all temperature measurement tasks.
Read more: ETI RayTemp 28 high-temperature IR thermometer in the shop →