Published 18 November 2026 at 13:55
The alarm goes off at five in the morning, someone opens the cold room and sees the display reading plus nine. Twenty minutes later it is back down to four. Were the goods too warm or not? With an ordinary air probe there is no way to tell, because the air fluctuates quickly every time the door is opened, while the product itself stays at its temperature far longer.
What the ThermaGuard Pharm 101 is
The ThermaGuard Pharm 101 is a digital thermometer for monitoring refrigerators and freezers where perishable goods are stored, such as vaccines, medicines and food. It has two probes: an internal one that measures the room temperature and an external thermistor probe on a two-meter cable. The external probe sits in a sealed bottle. You unscrew the bottle, fill it with glycol solution (a 50 ml bottle is included) and place it among the goods. The probe then acts as a model of the product, and the reading follows the temperature of the contents rather than that of the air.
Which problems it solves
The glycol dampens short-term fluctuations. You avoid false alarms when the door has been open during a stock check, yet a genuine temperature drift is still visible. The display also shows the current value as well as the max and min since the last reset, so you can see what happened during the night. Programmable alarm limits for high and low temperature make the display flash and the audible alarm sound, and the alarm can be acknowledged with any button.
The CalCheck function lets you check the instrument yourself against 0.0 °C (±0.1 °C) at any time, without sending it in. The housing is splash-proof to IP54 and the instrument complies with EN 13485. The version in this article is supplied with a UKAS calibration certificate for -18 and 0 °C.
Three situations where it fits
Health center or pharmacy. Vaccines must be kept within a narrow range, and the documentation must show that the cold chain has been maintained. The max/min values and the traceable certificate provide evidence in the event of deviations and audits.
Food production and commercial kitchens. In cold rooms with constant traffic, an air probe mostly tells you how often the door is opened. The glycol probe shows the temperature in the product, which is what your self-inspection routine actually needs to prove.
Laboratories. Reagents, culture plates and samples often cannot tolerate longer periods outside their range. With an internal and an external probe you can compare the room temperature with that of the contents and quickly determine whether the fault lies in the refrigerator or in the surroundings.
Why it pays off
The costly part of a cooling deviation is rarely the thermometer, but what happens to the goods. A batch of vaccine or a pallet of raw materials that has to be discarded costs many times more than the instrument. A reading that reflects the product also lets you make the right decision: discard when necessary, keep when the temperature has actually stayed within the limits. Self-inspection is also faster when CalCheck and the certificate are in place.
If you want to see the specifications and available accessories, you will find them on the product page.