Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The fridge failed on Friday evening and no one noticed until Monday morningLegionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without GuessingVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The fridge failed on Friday evening and no one noticed until Monday morningLegionella control that doesn’t end up in a binder: timestamped temperatures straight from the tapMoisture that isn’t visible on the surface becomes most expensive when it’s discovered after the floor is laidA Surface That Looks Clean Can Still Be Dirty: How ATP Measurement Shows the Result in Ten SecondsStop guessing the salt in your brine: read the concentration in a few secondsThree known temperature points are enough to tell whether your thermometer still reads correctlyHow to Know Your Thermometer Still Reads Correctly: Checking Type K Instruments at Three Known PointsOne drop is enough to see whether the coolant concentration is correct, without interpreting a borderline by eyeA spot check doesn’t tell you what happened in the cold room overnight between two inspectionsHow to Measure Small, Hot Surfaces from a Safe Distance Without Guessing

Intrinsically Safe Pressure Gauge — The Principle Isn’t to Withstand an Explosion, but to Never Be Able to Start One

Published August 22, 2026 at 10:07

In areas where flammable gas, vapor or dust may be present, there are two completely different ways to make electrical equipment safe. One is to contain: build an enclosure strong enough that an ignition inside stays there. The other is to not have enough energy to ignite anything in the first place.

The second is called intrinsic safety, and it’s the principle this instrument is built on. The circuit is designed so that neither a spark nor a hot surface can occur with enough energy to ignite the surrounding atmosphere — not even under fault conditions. That’s a crucial difference: the protection lies in the design, not in someone remembering to close a lid.

Comark C9501/IS intrinsically safe pressure gauge with dual inputs and IP67-rated housing

What it is

Comark C9501/IS is an intrinsically safe pressure gauge for the range 0 to ±140 mbar — equivalent to 0–2 PSI, 0–55 inH₂O, 0–1400 mmH₂O or 0–9999 Pa. It has dual inputs, so it can measure either against atmosphere or as differential pressure between two points, and displays the reading in PSI, mbar, inH₂O, mmHg, torr, Pa or mmH₂O.

The housing is rated IP67 against dust and water in accordance with BS EN 60529, with a protective rubber boot available as an option. The instrument is ATEX-certified to Ex II 1G Ex ia IIC T4 Ga (Baseefa03ATEX0079) and approved by internationally recognized bodies to intrinsic safety requirements. Two-year warranty.

The problem it solves

Here’s how the protection works. The electronics are designed to limit both electrical discharge and the instrument’s surface temperature. The energy stored in the circuit — in capacitors, inductances and battery — is kept low enough that a spark from a broken wire or a short circuit isn’t enough to ignite the most easily ignitable mixture covered by the classification. The temperature class likewise specifies that no surface gets hot enough to ignite the gas.

The designation is readable once you know what the parts mean: Ex ia is the strictest intrinsic safety level, permitting use even in the most exposed zone; IIC is the toughest gas group, which includes hydrogen and acetylene; T4 specifies the maximum permitted surface temperature. Together they describe the conditions under which the instrument may be used — and that’s exactly why the certification exists: it replaces an on-site judgment call with a documented approval.

So what does it measure? The ±140 mbar range is deliberately low. Pressure differences of this magnitude are what govern ventilation, filters and process gases: the pressure drop across a filter that shows when it’s clogged, the negative pressure that keeps a space contained, gas pressure in a burner line. With dual inputs, the difference is measured directly rather than as two readings you subtract from each other — which is both faster and removes one calculation error from the chain.

To be clear: a certified instrument doesn’t automatically make an installation safe. Which zone applies, which gases are present and which procedures apply are determined by the facility’s own classification and Ex documentation — the instrument’s marking states where it may be used, not where it should be used.

Three typical use cases

  • Process and chemical industry: pressure and differential pressure measurement in areas where flammable substances are handled or stored.
  • Gas and burner systems: monitoring working pressure in low-pressure lines during operation.
  • Ventilation in classified areas: pressure drop across filters and monitoring of positive or negative pressure where zone classification applies.

Why it pays off

The math here is unusually simple, and it’s not about measurement values. The alternative to a certified instrument is either not measuring in the classified area — and therefore not knowing — or bringing in an instrument that isn’t approved for the environment. The latter isn’t a saving but a regulatory violation with a consequence that can’t be priced.

The everyday benefit is that monitoring can actually be done during operation. Without intrinsically safe equipment, you often have to stop the process or clear the area before you can measure — which in practice means measuring rarely, and a slow change like a clogged filter is only discovered once it has already caused something. An instrument that’s allowed to stay in place turns measurement into routine instead of an event.

Read more about the Comark C9501/IS intrinsically safe pressure gauge →

More news

All news