Published July 7, 2026 at 19:14
Dissolved oxygen is the most important water-quality parameter for all aquatic environments where aerobic life occurs — lakes, ponds, fish farms, biological wastewater treatment, aquariums. Unlike pH, conductivity or temperature (which are relatively stable over hours), dissolved oxygen varies dramatically over the course of a day due to the photosynthesis-respiration cycle. Measuring it correctly requires:
- A calibrated polarographic or optical oxygen sensor.
- Automatic temperature compensation (oxygen solubility changes sharply with temperature).
- Continuous logging over at least 24 hours to capture the diurnal cycle.
- Documentation traceability for QC or regulatory reporting.
What the Extech SDL150 is
Dissolved oxygen meter/SD logger (SDL150) is a handheld digital meter with built-in SD card logging from the American manufacturer Extech. The instrument:
- Measures dissolved oxygen 0-20.0 mg/L (± 0.4 mg/L accuracy) and 0-100% saturation.
- Measures temperature 0-50 °C (± 0.8 °C) with a built-in temperature sensor in the polarographic oxygen probe.
- Has automatic temperature compensation (ATC) 0-50 °C.
- Has a dual backlit display for oxygen and temperature simultaneously.
- Stores up to 20 million readings on a 2 GB SD card (included).
- Has a programmable sampling rate from seconds to hours.
- Has min/max memory and data-hold function.
- Has a built-in USB/PC interface for direct download.
Basic specifications:
- Oxygen concentration: 0-20.0 mg/L (resolution 0.1 mg/L)
- Oxygen saturation: 0-100% (resolution 0.1%)
- Temperature: 0-50 °C (resolution 0.1 °C)
- Oxygen accuracy: ±0.4 mg/L or ±0.4% saturation
- Temperature accuracy: ±0.8 °C
- Sensor type: Polarographic (Clark cell)
- Temperature compensation: Automatic (ATC) 0-50 °C
- Offset adjustment: Yes, for relative measurements
- Logging capacity: 20 million values on SD card
- Manual memory capacity: 99 readings
- Power supply: 6× AA batteries (included)
- Accessories: Polarographic probe, SD card, 2 spare membranes, electrolyte, hard case
Dissolved oxygen — basic physical background
Water can dissolve oxygen from the atmosphere and through photosynthesis. The amount of dissolvable oxygen depends on:
- Temperature: Colder water dissolves more oxygen. At 0 °C the maximum solubility is 14.6 mg/L; at 25 °C it is 8.3 mg/L; at 30 °C it is 7.5 mg/L.
- Salinity: Seawater dissolves less oxygen than fresh water. At 20 °C and 35 ‰ salinity: 7.4 mg/L maximum.
- Air pressure: High pressure gives higher solubility; high-altitude ponds have a lower maximum.
- Photosynthesis: In summer, algae can raise oxygen to supersaturation levels (150-200%).
- Respiration: At night the same algae, bacteria and fish rapidly consume the oxygen.
”Saturation” is the percentage of maximum solubility at the current temperature and salinity. 100% saturation = in equilibrium with the atmosphere. Above 100% = supersaturation from photosynthesis or warming. Below 100% = undersaturation from consumption.
Why automatic temperature compensation is critical
A polarographic sensor (Clark cell) measures the electrochemical reduction of oxygen at a platinum cathode, which generates a current proportional to the local oxygen partial pressure. But the membrane’s permeability to oxygen changes sharply with temperature — at 30 °C the permeability is ~50% higher than at 20 °C.
Without temperature compensation, a 5 °C temperature difference would produce a 25% error in the oxygen measurement. The ATC algorithm combines the temperature with the sensor current to generate the correct oxygen concentration.
Calibration and maintenance of the polarographic probe
The polarographic probe is a consumable — the membrane wears, the electrolyte gets depleted, and the electrodes become coated with reduction products. Routine maintenance:
- Daily calibration: Air calibration (100% saturation). The probe is hung in humid air above the water surface for 10 min for temperature stabilization. At 100% saturation = air saturation.
- Weekly check: The membrane’s physical condition. Wrinkles or scratches = replace the membrane.
- Monthly membrane replacement: New membrane and electrolyte solution. 2 spare membranes are included in the SDL150 package.
- Annual electrode cleaning: Cathode polishing with a cloth and special product. May need to be done more often in dirty water.
- Zero adjustment: In a zero-oxygen solution (sodium sulfite). The offset adjustment on the instrument sets 0 mg/L exactly.
SD card logging — practical significance for use cases
Handheld oxygen measurement gives instantaneous values. Fish farming and environmental quality work often requires 24-72 hours of continuous data. With the SDL150:
- The probe is mounted on a mooring 1-2 m below the water surface.
- The instrument is placed in a waterproof box with desiccant.
- The sampling interval is set to, e.g., 5 minutes.
- Data is logged to the SD card automatically.
- After the measurement period, the SD card is transferred to a PC for analysis in Excel/CSV.
A 24-hour measurement at 5-minute intervals = 288 readings. A week = 2,016 readings. A month = 8,640 readings. A 2 GB SD card is enough for years of continuous data.
Where dissolved oxygen measurement makes a real difference
Fish farming (aquaculture): Trout, salmon and rainbow trout require >6 mg/L to thrive. Below 4 mg/L, growth starts to stall. Below 3 mg/L, fish mortality begins within hours. Nighttime logging reveals the risk.
Pond and lake management: Eutrophication causes algal blooms that consume oxygen at night. Fish kills in eutrophic lakes are typically oxygen suffocation at dawn.
Wastewater treatment (activated sludge): Biological treatment plants require 2-4 mg/L for bacteria. Too low = anaerobic process; too high = unnecessary energy consumption for aeration.
Recirculating aquaculture (RAS): Densely stocked fish tanks with biofilters require oxygen monitoring to detect leaks or filter failure before fish die.
Pond monitoring: Golf course irrigation ponds, industrial cooling ponds, firefighting tanks.
Water treatment plants and distribution systems: Oxygen levels affect iron and manganese precipitation, biofilm growth and taste quality.
Irrigation systems: Water for hydroponics and drip irrigation requires adequate oxygen for plant roots.
Environmental research: Oxygen mapping of rivers and streams to identify pollution sources.
Marine and public aquariums: Continuous monitoring to protect the animals.
Brewing and wine industry: Wort fermentation initially requires oxygen for yeast growth, then an anaerobic environment. The finished product’s oxygen level determines the oxidation risk.
What you get for your money
Extech SDL150 dissolved oxygen meter with SD card logging, measuring range 0-20 mg/L oxygen concentration and 0-100% oxygen saturation, temperature 0-50 °C, ±0.4 mg/L accuracy, polarographic (Clark cell) probe with built-in temperature sensor, automatic temperature compensation, dual backlit display, 20 million readings storage on a 2 GB SD card (included), 99 manual memory slots, programmable sampling rate, USB-PC interface, offset adjustment for zeroing, 6× AA batteries, 2 spare membranes and electrolyte solution, hard carrying case.
9,378 kronor is the instrument investment. Compared to a simple handheld DO meter (2,000-5,000 kr, no logging), the SDL150 provides continuous data collection that is indispensable for diurnal-cycle analysis. Compared to a fixed online oxygen sensor (25,000-80,000 kr with installation, for permanent mounting), the SDL150 is portable and can be moved between measurement points — which is critical for field environmental work and for fish farms with multiple ponds/tanks.
Read more: Extech SDL150 dissolved oxygen meter with SD logger in the shop →